For Sale by Negotiation

19" (480mm), WATERBURY-FARREL MODEL #ZR23-19, SENDZIMIR REVERSING MILL

SPECIFICATIONS

MANUFACTURER:     WATERBURY FARREL CORPORATION
MODEL No.:    ZR23-19
TYPE:    20-HI COLD REVERSING SENDZIMIR MILL
PREVIOUS USE:     BRASS   MAXIMUM INCOMING THICKNESS:   .120" (3mm)
MINIMUM FINISH THICKNESS:     .003" (.076mm)
MAXIMUM STRIP WIDTH:     19" (482mm)
ROLLING SPEED:       0 - 1000 FPM (0 - 305m/MIN.)
AUTOMATIC GAUGE CONTROL (AGC):  MOSS FLOW
HYDRAULIC SCREWDOWNS  

LINE CONSISTS OF:

PAYOFF:
TYPE:       EXPANDING MANDREL
TYPE OF EXPANSION:   HYDRAULIC
I.D. RANGE:       16"/18" (406/457mm)
                     22" (56mm) WITH EXPANSION PLATES
WIDTH OF PAYOFF:    23" (58mm)
PAPER UNWINDER
COIL CAR
PAYOFF DRIVE:    3 HP, 750 RPM, 3 PH., 60 HZ.
COIL SNUBBER HOLDDOWN:   HYDRAULIC
BACK TENSION

LEVELER:
TYPE:       ROLLER LEVELER
ROLL SIZE:     6" (152mm) DIA. x 21" (533mm) WIDTH
                  3 HP, 230/460 VOLTS, 1115 RPM,
                  9.8/4.9 AMPS, 3 PH., 60 HZ. INTO
                  FALK GEARBOX W/32.04 TO 1 RATIO  

ENTRY BILLY ROLL:   WITH SPEED COUNTER
ENTRY AND EXIT WIPERS  

ROLL COOLANT SPRAY SYSTEM
  NOTE: TANK IS NOT SALVAGEABLE -
   MUST BE REPLACED BY PURCHASER  

EDGE GUIDES:     MANUAL AND AUTOMATIC
     PRESSURE BOARDS AND WIPERS   T

HICKNESS GAUGES:
   MANUFACTURER:     VOLLMER
   MODEL No.:    VMF 3/22
   QUANTITY:  2 - ONE ON EACH SIDE OF THE MILL.  

HYDRAULIC SCREWDOWNS  

MAIN MILL DRIVE:
  250 HP, 650/1850 RPM, 500 VOLTS, 400 AMPS,
  G.E. D.C. S/N BD-2-80, MODEL 5CD25D26C506223  

WINDERS:
TYPE:     EXPANDING MANDREL
TYPE OF EXPANSION: MANUAL
DRUM SIZE:     20" (508mm) DIA. x 22" (558mm) WIDTH
WINDER DRIVES:    250 HP, 650/1465 RPM, 500 VOLT,
                     400 AMPS, D.C. INTO FARREL GEARBOX
                     MODEL FS18, RATIO 7.61/1

COIL SPOOLERS:    60 HP, 500 VOLTS, 98 AMPS, 650/2100 RPM
                  INTO A D.O. JAMES GEARBOX W/14 TO 1 RATIO,
                  NEW 1996, S/N 259215  

RECOILER:     15"/16" I.D. x 21" WIDE
              HYDRAULIC PUSHOFF COIL CAR
RECOILER DRIVE:   25 HP, 240 VOLTS, 650/2000 RPM,
                  86 AMPS, G.E. D.C.  

ELECTRICAL CONTROLS:
   G.E. FANUC SCR THYRISTOR CONTROLS ON PAYOFF AND REWINDER
   MOTOR GENERATOR ON ALL OTHER COMPONENTS  

DATE MILL CEASED OPERATION 2007
MILL INSTALLED AND FULLY OPERATIONAL

PRICE US $950,000 "as is where is"