Pickling Line, Tension Levelling, CTL Line, Coil Cleaning Line etc & Wean Damiron 8mm CTL Line

Instructed by a Major Greek Fabrication Business & Tezcan Galvanising

For Sale by Negotiation in Turkey & Greece

Bronx Australia Compact Coil Painting Line

YOM 1998

Width:  800 – 1500mm
Gauge:  0.30 – 1.20mm
Coil Weight:  15 tonnes max
Speed:  33m/min
Output:  Approx 50 tonnes per day @ 0.50mm
Solvent Based System

Coating Thickness (2 passes):
6 Micron Primer
Up to 25 Micron Colour Coat
8 Micron Backing Coat
 
Line Composition (Left to Right)
 
Coil Car and Uncoiler
Pinch Roll/Carry Over Table/Pinch Roll
Bronx Australia Painting Machine
3 Station Infra-Red Drying
Water Cooling – with Squeegee Rollers and Air Knife
EMG Steering Guide to Shear
Film Applicator
Recoiler and Coil Car
Fume Extraction Plant
 
All available Spares, Drawings & Technical Documentation

Location: Kocaeli, Turkey (120km East from Istanbul)

 

Cummins 3.5MW Gas Fired Co- Generation Power Plant Producing 3500KG/HR of Steam

2 x Cummins V18 Natural Gas Engines (YOM 2004) Model 1750GQNB, S/N 104K473790 & 104K474090, 18,873 Recorded Hours and 19,129 Recorded Hours. Rated Power: Continuous; Power Factor 0.8, Rated Current 3157A, Voltage 400; Frequency 50 Hz, Rotating Speed 1500rpm; Battery Volts 24V; Control Systems PCS; 2 x ABB 400V AC Alternators (YOM 2007)


2 x Selnikel Steam Boilers (each 1750kg/hr); Heat Exchanger, Pipework, Pumps etc
Escada Operating and Control System
 
Please note. One of the Cummins Engines requires attention including replacement of1 Cylinder; replacement of Eccentric Shaft and Shaft Wheels.
 
All available Spares, Drawings & Technical Documentation is included
in the sale

Location: Kocaeli, Turkey (120km East from Istanbul)

 

Dae Hyun Mini-Shear Cut to Length Line

YOM: 2007

Material: Galvanised, Cold Rolled Carbon Steel
Width: 600 - 1500mm
Gauge: 0.4 - 2.0mm
Line Speed: 80m/min Max
Line Orientation: L to R
Line Footprint: Approx. 35m x 10m
Tolerance: -0/+2.0mm
Cut Lengths: 800-3120mm (5000mm if conveyor extended)
Control Techniques Operators Desk with Siemens S7 Operating System
DONE LITTLE WORK SINCE INSTALLATION
 
Line Composition
Coil Car; Uncoiler with Snubber. Carry Over Table
6 Hi Leveller with 10/11 Rollers
Looping Pit; Carry Over; Inspection Table
Strip Guides, Pinch Roll; Measuring Device
Dae Hyun Precision Rotary Shear
Elevating Conveyor Belt
Ronconi Hydraulic Stacking Table and 3 Cars
Hydropar Hydraulic Power Pack

All available Spares, Drawings & Technical Documentation

Location: Kocaeli, Turkey (120km East from Istanbul)

 

Late Model Electrolytic Strip Degreasing Line

200,000 Tonnes per year Capacity

YOM 2013

Manufacturer: Stargroup Research and Integration Co Ltd
Orientation: Right to Left
Feed Stock: Carbon Steels, Low Alloy Steels
Coil Width: 800-1300mm
Gauge: 0.25-2.0mm
Coil Size: I/D 508mm: O/D 2100mm (max)
Coil Weight: 25 tonnes (max)
Process Line Speed: 180m/min max
Threading Speed: 30m/min
Control System: Siemens S7
 
Line Composition
Coil Car; Uncoiler with Snubber
Pinch Roll; 5 Roll Flattener
EMG Steering Guide; Shear; Carry over table
FZY 200 Narrow Lap Automatic Seam Welder.
Tension Rolls
Hot Water Wash; Dryer; Accumulator
Electrolyte Cleaning Tank with brushes and hot air dryer
Tension Rolls; EMG Steering Guide
Tension Rolls; Shear; Pinch Roll
Recoiler with Belt Wrapper; Coil Car
Fluid Filtration Plant and Extraction
Modern Electrical Control Cabinet
 
All Available Spares, Drawings and Technical Documentation

Location: Kocaeli, Turkey (approx. 120km east of Istanbul)

 

Techint Push/Pull Pickling Line and Acid Regeneration Plant

Capacity 750,000 TPY

YOM 2005

Width: 700-1550mm
Gauge: 1.5-5.0mm
Speed: 170m/min
Max Coil Weight: 30 tonnes
Coil Size: I/D 610-760mm; O/D Max 1860mm
Operating System: Siemens S7
Pickling Medium: Hydrochloric Acid (180g/litre)
Footprint: Approx 120m x 10m
Rubber Lined Steel Tanks
 
Line Composition
2 x Coil Cars
2 x Uncoilers
2 x 5 Roll Flatteners
Pinch Roll and Shear
Alkaline Prewash Tank
4 x Pickling Tanks with heat exchangers
Cascade Rinse
Hot Air Dryer
Looping Pit Equipment
Guide Rolls to Exit Crop Sheer, Side Trimmer and Scrap Chopper
Automatic Edge Control
Tension Rolls to Recoiler with Snubber
Exit Coil Car
 
Acid Regeneration Plant
CMI (UVK) Reactor – 36 burner NG - 900°C
Cyclone, Venturi, 3 x Absorbers; Blower and Exhaust Fan; Agglomerator; Oxide Mill
Tank Farm with 12 Vessels (9 x 65m³/3 x 55m³)
Selnikel Nature Gas Fired 3500kg/hr Steam Raising Boiler and Water Deionising Plant.
 
All Available Spares and Drawings

Location: Kocaeli, Turkey (120km East from Istanbul)

 

Stamco Heavy Duty Tension Levelling/Coil Improvement Line for Coiled Steel and Aluminium Plate

YOM: 1992

Coil width: 762-1867mm
Gauge (Steel) 1.6mm-4.8mm (Upto 6.5mm at restricted speed)
Coil Weight: 18 Tonnes
Coil O.D: 914-2135mm
Coil I.D: 508-635mm
Shear Strength: 241-344 mpa
Yield Strength: 69.8 – 551.5 mpa
Line Speed: Upto 92 m/min
Line Orientation: L to R
Operating System: Control Techniques
 
Line Composition
2 x Twin Cone Uncoilers each with Snubber and Coil Car
2 x Sets of Pinch Rolls
Monarch Stamco 5 Roll Flattener
Shear and Scrap Conveyor; Pinch Rolls
Butech Edge Trimmer; Carry Over Table
Taylor Winfield Prep/Lap 200Kva 76inch Welder
Stamco Stitcher; 4 Roll Bridle
Shotblast Cabinet (top and bottom) with Extraction
4 Roll Bridle; Pinch Roll; Carry Over Table
Exit Shear; Inspection Table
Pinch Roll/Pass Line Roll
Expanding Mandrel Recoiler with Belt Wrapper Coil Car
Dust Extraction Plant
Line Operators Desks
 
All available Spares, Drawings & Technical Documentation

Location: Kocaeli, Turkey (120km East from Istanbul)

 

Wean Damiron Steel Cut to Length and Levelling Line and Right to Left Operation

- 32 tonne Coils

- 1500mm wide

- Gauge 0.8 - 8.0mm

Fuchini Cone Type Uncoiler; Initial Flattening Stand with 5 Roll Flattener; Wean Damiron 17 Roll Cassette Leveller; Cincinatti '18' Inline Shear; Run on & Take off Tables; Modern Control Panel.

Extensive Range of Boxed and Unboxed Spares

including spare gearbox for cassette leveller. Comprehensive Range of Drawings.

Line Length approx 95 metres.

 

Dismantled and ready for packing

Location: Northern Greece

  • Cummins 3.5MW Gas Fired Co- Generation Power Plant Producing 3500KG/HR of Steam

    Cummins 3.5MW Gas Fired Co- Generation Power Plant Producing 3500KG/HR of Steam

  • Dae Hyun Mini-Shear Cut to Length Line

    Dae Hyun Mini-Shear Cut to Length Line

  • Late Model Electrolytic Strip Degreasing Line

    Late Model Electrolytic Strip Degreasing Line

  • Techint Push/Pull Pickling Line and Acid Regeneration Plant

    Techint Push/Pull Pickling Line and Acid Regeneration Plant

  • Stamco Heavy Duty Tension Levelling/Coil Improvement Line for Coiled Steel and Aluminium Plate

    Stamco Heavy Duty Tension Levelling/Coil Improvement Line for Coiled Steel and Aluminium Plate

  • Bronx Australia Compact Coil Painting Line

    Bronx Australia Compact Coil Painting Line

  • Wean Damiron Steel Cut to Length and Levelling Line and Right to Left Operation

    Wean Damiron Steel Cut to Length and Levelling Line and Right to Left Operation

Location

Tags

Metal Processing Steel Flat Products Aluminium Long Products Generators Machine Tools Steel Long Products

Find out more

If you want to learn more about this auction, why not talk to one of our specialists:

Charles Moses F.R.I.C.S.

t: +44 (0)7831 854971

e: .(JavaScript must be enabled to view this email address)

Dr Phil Thomas

t: +44 (0)7738 804761

e: .(JavaScript must be enabled to view this email address)

CJM Asset Management Online Clearance Auction  - mailchi.mp/cjmasset/firep…

CJMindustrial - 9 Nov ago